Ionizing equipment

Ionizers are used to neutralize electrostatic charges in ESD-protected areas, especially where direct earthing is not possible or sufficient. Typical designs are table-top and overhead ionizers, ionizing bars and ionizing guns, which reduce static charges by ionizing the air. Special ionizing units with reduced particle output are available for cleanroom applications in order to meet cleanliness requirements. In addition, installation and test systems enable continuous monitoring and assurance of the ionizing performance, which supports ESD protection in sensitive production areas.

Our Brands

Simco
It is a blue pen with a white tip. The body has a smooth surface and a practical clip. The pen reads
Test pin TensION
Test pin TensION ++SIMCO++

Product No.: 7500.TENSION
92.65 CHF
excl. 8.1% tax
Show product
Image
Accessories for ionizing bars
AeroBar 5225S Remote control
AeroBar 5225S Power supply unit
AeroBar MP 5635 Replacement emitter
AeroBar MP 5635 power supply unit

4 Products
Product No.: 7500.AB.R
Price on request
to the product family
Image
EPAtec - Ion spray nozzle
AN HP02 ion spray nozzle EPAtec
24V DC / 230 V, 50 Hz with power supply unit
incl. nozzle nosepiece OP-S

Serial no.:

Product No.: 7501.AN-HP02
534.65 CHF
excl. 8.1% tax
Show product
The image displays an elongated, white device with three ventilation slots and a control panel. The control panel features buttons and displays for operation.
EPAtec ionizer (overhead model)
AB 120H overhead model EPAtec
with 3 fans, ionizer, 230V / 50 Hz


serial no

Product No.: 7501.AB-120H
1,035.05 CHF
excl. 8.1% tax
Show product
The image shows an air ionization device that is rectangular and flat. It has a gray casing with a white front and blue frame. Control knobs and switches are located on the front.
EPAtec table-top ionizer
AB 40 EPAtec table-top model
Ionizer, 230V / 50 Hz

Product No.: 7501.AB-40
697.25 CHF
excl. 8.1% tax
Show product
The image shows a device casing with a cable and plug. On the front, there is a circular grille for air exchange, equipped with a small slider.
Preview: The image shows a device casing with a cable and plug. On the front, there is a circular grille for air exchange, equipped with a small slider.
Preview: The image shows a white-gray fan attached to a movable arm. The arm is made of metal and is green. The fan has a grid for air circulation and a small control light.
Further accessories for table ionizers
Power supply for ION type 6422
Spring joint arm for ionizer minION

2 Products
Product No.: 7500.6422.N
from 103.50 CHF
excl. 8.1% tax
to the product family
The image shows a small fan in white and black. It has a round grille, a rotary knob for speed adjustment, and a flat, rectangular base.
Preview: The image shows a small fan in white and black. It has a round grille, a rotary knob for speed adjustment, and a flat, rectangular base.
Preview: The image shows an electrical device with a larger round fan in the center, surrounded by a rectangular casing. It has switches and LED indicators at the lower center, as well as a reference to the brand
Filter for table ionizers
ESD-protective
Air filter set for ionizer Aerostat PC for assembly
Air filter for ionizer Aerostat PC / nonwoven
Air filter kit for ionizer Aerostat PC 2
Replacement filter for inizer Aerostat PC 2
Air filter element for ionizer Aerostat PC

5 Products
Product No.: 7500.PC.Z10
from 24.25 CHF
excl. 8.1% tax
to the product family
The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
Preview: The image shows two elongated, silver ventilation devices. Each has a blue control area with buttons and symbols. The devices are arranged one above the other. They are designed to be sturdy and functional.
Preview: The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
Preview: The image shows an elongated, white bar with two black pads at the ends. In the middle, there is a blue area with controls, presumably for operation.
Accessories for overhead ionizers
ESD-protective
Air filter frame for ionizer Aerostat CR2000
Air filter element / replacement (PU 6 pieces) for ionizer Aerostat CR2000
Power cable for ionizing blower 5810i
Air filter frame for ionizer Aerostat GUARDIAN
Air filter element / replacement (PU 6 pieces) for ionizer Aerostat GUARDIAN

5 Products
Product No.: 7500.C32X.N
from 20.30 CHF
excl. 8.1% tax
to the product family
The image displays a long, rectangular device in light colors. It has multiple outputs on the bottom and controls on the front, as well as blue lettering with the name
AeroBar MP 5635 Ionizing bar
AeroBar MP 5635 Ionizing bar 350 mm
Width : 34 mm / Height : 78 mm / Length : 450 mm / Active length: 350 mm / Emitters: 8 / Emitter spacing: 50 mm
AeroBar MP 5635 Ionizing bar 500 mm
Width : 34 mm / Height : 78 mm / Length : 600 mm / Active length: 500 mm / Emitters: 11 / Emitter spacing: 50 mm
AeroBar MP 5635 Ionizing bar 900 mm
Width : 34 mm / Height : 78 mm / Length : 1000 mm / Active length: 900 mm / Emitters: 13 / Emitter spacing: 75 mm
AeroBar MP 5635 Ionizing bar 1050 mm
Width : 34 mm / Height : 78 mm / Length : 1150 mm / Active length: 1050 mm / Emitters: 15 / Emitter spacing: 75 mm
AeroBar MP 5635 Ionizing bar 1500 mm
Width : 34 mm / Height : 78 mm / Length : 1600 mm / Active length: 1500 mm / Emitters: 31 / Emitter spacing: 75 mm

5 Products
Product No.: 7500.AB-MP.18
Price on request
to the product family
The image shows an elongated, gray device with a blue label. It has two small LED lights in different colors and is intended for wall mounting.
fusION - Mini Ionizer
fusION - mini ionizer (without blower), 24V DC
low space requirement,
dimensions: 51 x 33 x 89 mm (WxHxD),
emitter points: Tungsten
[ISO 6 / Cleanroom class 1,000]
Serial no.:

Product No.: 7500.FU
Price on request
Show product
The image shows a small, square fan. It has a black rotor in the center and a light, rectangular frame with four mounting holes in the corners.
Preview: The image shows a small, square fan. It has a black rotor in the center and a light, rectangular frame with four mounting holes in the corners.
Preview: The image displays a rectangular, gray housing part with two green LEDs and an opening. At the top, there is a square fan with a black blade surface.
Accessories for built-in ionizers
Blower pluggable, 40 x 40 x 10 mm for mini ionizer fusION
Power supply unit 230V AC / 24V DC for mini ionizer fusION

2 Products
Product No.: 7500.FU.FAN
Price on request
to the product family
Image
Nozzle attachments for ionizing spray nozzles
Nozzle attachment 60° Standard for EPAtec ion spray can
Nozzle attachment 200 mm for EPAtec ion spray can
Nozzle attachment 300 mm for EPAtec ion spray can
Nozzle attachment 400 mm for EPAtec ion spray can
Nozzle attachment 200 mm, Ø 10 mm for EPAtec ion spray can
Nozzle attachment 300 mm, Ø 10 mm for EPAtec ion spray can
Nozzle attachment 500 mm, Ø 10 mm for EPAtec ion spray can
Nozzle attachment hose adapter for EPAtec ion spray can

8 Products
Product No.: 7501.OP-60S
Price on request
to the product family
The image shows a white fan with a large, round grille at the front. It has a rotary knob on the side and a small display below, which may indicate the operational status.
Ionizing blower 5802i CXL - mobile tabletop model
ESD / Discharge time max.: 1 - 2 s / Ozone generation max.: 0.008 ppm
Ionizing blower 5810i CXL +SIMCO+
mobile tabletop model, Steady State DC,
automatic ermitter cleaning system,
base for table mounting, coverage 30x150 cm
incl. power supply unit
Serial No.:

Product No.: 7500.CXL
1,356.35 CHF
excl. 8.1% tax
Show product
The image shows an air ionizer in a compact, rectangular casing. It has a round fan with a grid and two indicator lights (green and red) as well as a rotary knob for adjusting the airflow.
BlueLine mobile ionizer
AB 10H BlueLine, mobile ionizer
Dimensions: 102 / 140 x 120 / 140 x 58 mm WxHxD
Ionizer, 24V DC / 230V, 50 Hz

Product No.: 7501.AB-10H
485.15 CHF
excl. 8.1% tax
Show product
The image shows a portable measuring device, primarily yellow with black elements. It features a display and five buttons used for On/Off, Mode, Start, and Stop.
Preview: The image shows a portable measuring device, primarily yellow with black elements. It features a display and five buttons used for On/Off, Mode, Start, and Stop.
Preview: The image displays a compact electric device with a digital display and three buttons. It features a black border and a light, textured background.
Ionizer Tester type CPM35 for verification tests
ESD-protective
CPM 35 Ionizer Tester
ESD
CPM 35 Rubber case with foot
ESD / Version: case with foot

2 Products
Product No.: 7100.CPM35
from 52.05 CHF
excl. 8.1% tax
to the product family
The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
Preview: The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
Preview: It is a black, rectangular device with an outlet on top and a serial interface on the bottom. On the side, there is a switch labeled
WIM 47 Ionizer Monitor
ESD-protective
WIM 47 Ionizer Monitor
ESD
WIM 47 Switch Box

2 Products
Product No.: 7100.WIM47
from 219.70 CHF
excl. 8.1% tax
to the product family
17 to 32 (from a total of 33)