Soldering wires
ISO-Core® for fine soldering in the electronics and electrical engineering as well as in the telecommunications and electric motor construction.
FELDER ISO-Core® soldering wires are made of the same high-purity alloy components according to the international standards as FELDER ISO-Tin® electronic solders.
Product | Alloy | Melting range | Application |
Sn100Ni+® ** | Sn99.3Cu0.7AgNiGe | 227 °C eutectic | Manual and mechanical soldering, lead-free |
Sn99Ag+® ** | Sn99Ag0.3Cu0.7NiGe | 217 °C - 227 °C | Manual and mechanical soldering, lead-free |
SAC | Sn95.5Ag3.8Cu0.7 | 217 °C eutectic | Manual and mechanical soldering, lead-free |
Sn96.5Ag3.5 | Sn96.5Ag3.5 | 221 °C eutectic | Manual and mechanical soldering, lead-free |
Sn99.3Cu0.7 | Sn99.3Cu0.7 | 227 °C eutectic | Manual and mechanical soldering, lead-free |
Sn97Cu3 | Sn97Cu3 | 230 °C - 250 °C | Manual and mechanical soldering, lead-free |
Sn60Pb40 | Sn60Pb40 | 183 ºC - 190 °C | Manual and mechanical soldering, leaded |
Sn63Pb37 | Sn63Pb37 | 183 °C eutectic | Manual and mechanical soldering, leaded |
Sn60Pb38Cu2 | Sn60Pb38Cu2 | 183 ºC - 190 °C | Manual and mechanical soldering, leaded |
** Fuji patent: DE Patent no. 19816671C2; US Patent no. 6.179.935B1; Japan Patent no. 3296289
Further alloys available on request
The flux is characterized by its high temperature resistance. The bright solid flux residues of this soldering wires do not cause corrosion in non-ferrous metals. They can therefore remain on the solder joint. An optimum wetting and spreading values exceeding the normal standards turn it into a top product in flux-cored solder wires, also in its lead-free quality.
In combination with the lead-free alloy Sn95.5Ag3.8Cu0.7, the qualities of "EL" and "ELR" were assessed positively by Siemens Berlin (certification authority CT MM 6).
Flux-cored, halogen-activated soft solder wires | |
ISO-core® "RA" | Standard solder wire for manual soldering in the electronics, halogen content < 1% |
Flux-cored, low activated, lead-free soft solder wires | |
ISO-core® "Clear" | Splash-free solder wire for manual and and electromechanical engineering, standard flux content 3.5% |
Flux-cored, halogen-free activated soft solder wires Flux according to DIN EN 29454.1, 1.1.3.B, 1.2.3.B, and 2.2.3.B or DIN EN 61190-1-3 | |
ISO-core® "EL" | No-clean standard solder wire for manual and automatic soldering in the electronics, halogen-free activated(1.1.3.B/ROL0), standard flux content 3.5% |
ISO-core® "ELR" | Low-residue no-clean SMD solder wire. Specially adapted to the requirements of resoldering work on SMD-equipped components (2.2.3.B/ORL0), standard flux content 1% |
Reel sizes: 100 g, 250 g, 500 g, 1000 g, 2500 g, 5000 g
Flux distribution: single-cored (standard), 2- and 5-cored on request