Cuttings

Our table mats, shelf and floor coverings are characterized by a resistance that ensures slow discharge.
Ideally, they are also correctly grounded via an ESD grounding module - for this purpose, all our coverings can be equipped with the corresponding push-button connections. It goes without saying that all our coverings comply with DIN EN 61340 and are RoHS-compliant.

Table Covering Cutting

Configure your ESD synthetic rubber table covering
  • Materials: 1402.662.R, 1402.663.R, 1402.664.R, 1402.665.R
  • Does not cause corrosion on electronic contacts
  • Resistant to solder and heat
  • Dissipative, wear-resistant use layer, high-resistance underlayer, material thickness: 2 mm
  • Easy to clean, abrasion-resistant, dimensionally stable, environmentally friendly as it is free from PVC, plasticizers, halogens and heavy metals
  • Highly wear-resistant rubber material, permanently elastic
  • Complies with the ESD standard DIN EN 61340-5-1

Shelf covering synthetic rubber cutting

Configure your shelf covering made of wear-resistant synthetic rubber for shelving and storage areas.
  • Material: 1450.659.R
  • Synthetic rubber, material thickness: 1.5 mm
  • Color: black
  • Heat-resistant
  • Volume conductive
  • Suitable for loose laying
  • Complies with the ESD standard DIN EN 61340-5-1

Grooved profile covering +NBR+

Configure your +NBR+ grooved profile covering for transport trolleys, tool cabinets, shelves and other storage surfaces.
  • Material: 1451.7500.R120
  • NBR (new rubber compound), material thickness: 3 mm
  • Scoring profile
  • Color: black
  • Slip-resistant
  • Volume conductive
  • Suitable for loose laying
  • Complies with the ESD standard DIN EN 61340-5-1

FFloor covering type MEGA 2.0 cutting

Configure your floor covering type MEGA 2.0
  • Base material: 1250.670.R
  • Synthetic rubber, material thickness: 2.0 mm
  • Color: dark grey / granule design
  • Two-layer composite flooring
  • Volume dissipative
  • For loose laying without bonding, self-adhesive
  • Complies with the ESD standard DIN EN 61340-5-1
  • Insulation resistance complies with DIN VDE 0100 T410
To dissipate electrostatic charges, the coverings must be equipped accordingly - for this purpose, the coverings are connected in an ESD-compliant manner using a snap.

Floor covering type MEGA 3.5 cutting

Configure your floor covering type MEGA 3.5
  • Base material: 1250.680.R
  • Synthetic rubber, material thickness: 3.5 mm
  • Color: dark grey / granule design
  • Two-layer composite flooring
  • Volume dissipative
  • Complies with the ESD standard DIN EN 61340-5-1
  • Insulation resistance complies with DIN VDE 0100 T410
To dissipate electrostatic charges, the coverings must be equipped accordingly - for this purpose, the coverings are connected in an ESD-compliant manner using a snap.

Flooring Ecostat PR - 2.0 PVC

Configure your Ecostat PR - 2.0 PVC floor covering
  • Base material: 1250.7004.R
  • Single-layer PVC, material thickness: 2 mm
  • Conductive backing
  • Electrostatically volume-dissipative
  • Color: gray
  • Abrasion-resistant, permanently elastic
  • Complies with the ESD standard DIN EN 61340-5-1
  • Use of lifting and forklift trucks when properly bonded with fiber-reinforced adhesive
To dissipate electrostatic charges, the coverings must be equipped accordingly - for this purpose, the coverings are connected in an ESD-compliant manner using a push button.