The image shows a mechanical machine with visible gears and rollers. A hand crank is located on the right side, and a long, thin strip of paper extends from the machine.
Cutting and bending machine TP6/PR-F/1 - basic machine
(Product No.: 415.191)
The image shows a mechanical machine with visible gears and rollers. A hand crank is located on the right side, and a long, thin strip of paper extends from the machine.
Notice / Inquire

Cutting and bending machine TP6/PR-F/1 - basic machine

Cutting and bending machine TP6/PR-F/1 - basic machine

dpvlink:
5170
Further product information
 
5,923.25 CHF

excl. 8.1% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

Cutting and bending machine TP6/PR-F/1 - basic machine

The cutting and bending machine TP6/PR-F/1 from Olamef is specifically designed for cutting, bending, and forming taped axial components. This robust basic machine is characterized by high reliability and is ideal for wire sizes between 0.5 and 0.9 mm. Equipped with a simplified bending adjustment, it significantly reduces setup times, which increases efficiency.
The machine has a width of 240 mm, a height of 220 mm, and a length of 490 mm. The weight is 14 kg, and it processes up to 7,000 components per hour. An adjustable motor drive can additionally be purchased to further enhance adaptability. A residual tape unwinder TNS/2 is also included in the delivery, which facilitates the handling of materials. Note that the machine is delivered without processing tools.
This machine is an excellent choice for technical requirements where precision and speed are paramount.
Lead diameter d
Lead diameter d
0.5 - 0.9 mm
Components per hour
Components per hour
7,000
Height
Height
220 mm
Length
Length
490 mm
Width
Width
240 mm
Weight
Weight
14 kg
Show accessories
Accessories

Accessories

The image shows a technical drawing of a component with various labels for dimensions: L, D, B, P, d, and c. The shape is symmetrical with two outwardly curved ends.
Standard tool cut/bend for cutting and bending...
Standard tool cut / bend
wire thickness 0.5 - 0.9 mm
++ Tool code 420650 TP6/PR-F/1++
dpvlink
6028

1,517.05 CHF
The image displays a technical drawing of a profile with various dimensions. It has a U-shape, two upright sides, and a central connection. Dimensions are noted beside the lines.
Standard tool stand-off 3.0 mm for cutting...
Standard tool stand-off 3.0 mm
wire thickness 0.5 - 0.9 mm
++ Tool code 420750 TP6/PR-F/1++
dpvlink
6029

1,517.05 CHF
The image displays a technical drawing of a profile. Various dimensions are indicated: L (length), B (width), h (height), d, and z, as well as a central connection (c) and a structure with curved lines.
Standard tool stand-off 2.5 mm for cutting...
Standard tool stand-off 2.5 mm
wire thickness 0.5 - 0.9 mm
++ Tool code 420800 TP6/PR-F/1++
dpvlink
6030

1,517.05 CHF
The image shows a technical drawing of a component with various dimensions. It has a U-shaped structure with two lateral bulges that bend downwards, and markings for dimensions such as B, D, L, and h.
Standard tool stand-off/snap-in for cutting...
Standard tool stand-off/snap-in
wire thickness 0.5 - 0.8 mm
++ Tool code 420850 TP6/PR-F/1++
dpvlink
6031

1,517.05 CHF
The image displays a technical drawing of a U-shaped component with various dimensions. Lines and measurements for D, L, c, h, B, E, d, P, and z are indicated.
Standard tool, reducing pitch for cutting...
Standard tool reducing grid dimension
by 2.54 mm, wire thickness. 0.5 - 0.9 mm
++ Tool code 420900 TP6/PR-F/1++
dpvlink
6033

1,517.05 CHF
The image shows a technical drawing of a component with multiple dimensions. It has curved ends on both sides and a central connection. The dimensions are marked with letters and lines.
Standard tool stand-off/snap-in for cutting...
Standard tool stand-off/snap-in
wire thickness 0.6 - 0.9 mm / larger beading
++ Tool code 420950 TP6/PR-F/1++
dpvlink
6032

1,517.05 CHF
The image displays a technical drawing of a component with various dimensions. It features a cylindrical center with two lateral arms that are bent downwards.
Standard tool snap-in for cutting and bending...
Standard tool component lying on
printed circuit board, snap - in,
wire thickness 0.5 - 0.8 mm
complete with component holder 421004 and 421005
++ Tool code 421000 TP6/PR-F/1++
dpvlink
5177

1,622.90 CHF
The image shows a machine with metallic rollers processing a black roll with fine, parallel wires. Yellow bands hold the structure together.
Feeder / component body type 200240
Feeding / component body type 200240
for taped components
suitable for TP 6.EC / TP 6 / TP 6.97, TP6/PR-B,
TP6/PR-B/97, TP6/S
dpvlink
13342

442.25 CHF
The image shows a blue, cylindrical machine with a handle for turning. On the side, there are several small rollers and an adjustable pressure mechanism. It is presumably used for processing paper strips.
BR6 reel holder
BR6 reel holder
dpvlink
5524

164.30 CHF
The image shows a machine for milling or cutting. It has two large rollers that rotate, and a long chute for the material. On the right side, there is an emergency stop button.
CS 10 feeding unit / loose components
CS 10 - feeding unit for loose components
for TP 6 + TP6/S + TP6/PR-B
(Model 51.0100 part number...)
dpvlink
5163

1,617.85 CHF
The image shows a machine for milling or cutting. It has two large rollers that rotate, and a long chute for the material. On the right side, there is an emergency stop button.
CS 20 feeding unit / loose components
CS 20 - feeding unit for loose components
for TP 6/V-PR
(Model 51.0200 part number...)
dpvlink
5163

1,742.60 CHF
The image shows a machine for milling or cutting. It has two large rollers that rotate, and a long chute for the material. On the right side, there is an emergency stop button.
CS 30 feeding unit / loose components
CS 30 - feeding unit for loose components
for TP/6V
(Model 51.0300 part number...)
dpvlink
5163

1,592.65 CHF
The image shows a machine for milling or cutting. It has two large rollers that rotate, and a long chute for the material. On the right side, there is an emergency stop button.
CS 40 feeding unit, loose components
CS 40 - feeding unit for loose components
for TP 6/PR F
(Model 51.0400 part number...)
dpvlink
5163

1,742.60 CHF
The image shows a machine. On the right side, there is a black box with a red emergency stop button and various control knobs. On the left, metal rollers are visible.
M adjustable motor drive
MOT-98 adjustable motor 220V
for TP 6 + S + R + R CP + V + PR B
(Model 7915030 art. no....)
dpvlink
5523

2,216.35 CHF
The image shows a machine. On the right side, there is a black box with a red emergency stop button and various control knobs. On the left, metal rollers are visible.
M/1 adjustable motor drive
MOT-98/A adjustable motor 220V
for TP 6 / V - PR + TP 6 / PR - F
(Model 7915032 art. no....)
dpvlink
5523

2,278.10 CHF
The image shows a mechanical adhesive or labeling machine. It has metallic parts, rollers, and a platform through which a label passes. The machine is robust and designed for industrial use.
TNS/1 waste tape ejector
RA waste tape ejector TNS/11
for TP 6 + TP 6 / S + TP 6 / R + TP/6V + TP6/PR-B
(Model 21.0011)
dpvlink
5525

477.30 CHF
The image shows a mechanical adhesive or labeling machine. It has metallic parts, rollers, and a platform through which a label passes. The machine is robust and designed for industrial use.
TNS/13 waste tape ejector
RA waste tape ejector TNS/13
for TP 6 / V PR
(Model 21.0013)
dpvlink
5525

477.30 CHF
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Product Family

TP 6 / PR-F

Article image
Article description
Lead diameter d
Components per hour
Height
Length
Width
Weight
Price
Compare
415.191 - Cutting and bending machine TP6/PR-F/1 - basic machine
415.191
Cutting and bending machine TP6/PR-F/1 - basic machine
0.5 - 0.9 mm
7,000
220 mm
490 mm
240 mm
14 kg
5,923.25 CHF
Show Compare List (0)

This product is similar to:

The image shows a technical drawing of a component with various dimensions. It has a U-shaped structure with two lateral bulges that bend downwards, and markings for dimensions such as B, D, L, and h.
Standard tool stand-off/snap-in for cutting...
Standard tool stand-off/snap-in
wire thickness 0.5 - 0.8 mm
++ Tool code 420850 TP6/PR-F/1++
dpvlink
6031

1,517.05 CHF
The image shows a machine for milling or cutting. It has two large rollers that rotate, and a long chute for the material. On the right side, there is an emergency stop button.
CS 20 feeding unit / loose components
CS 20 - feeding unit for loose components
for TP 6/V-PR
(Model 51.0200 part number...)
dpvlink
5163

1,742.60 CHF
The image shows a technical drawing of a component with multiple dimensions. It has curved ends on both sides and a central connection. The dimensions are marked with letters and lines.
Standard tool stand-off/snap-in for cutting...
Standard tool stand-off/snap-in
wire thickness 0.6 - 0.9 mm / larger beading
++ Tool code 420950 TP6/PR-F/1++
dpvlink
6032

1,517.05 CHF
The image shows a machine for milling or cutting. It has two large rollers that rotate, and a long chute for the material. On the right side, there is an emergency stop button.
CS 10 feeding unit / loose components
CS 10 - feeding unit for loose components
for TP 6 + TP6/S + TP6/PR-B
(Model 51.0100 part number...)
dpvlink
5163

1,617.85 CHF