The image shows a mechanical device that has two transparent chambers, connected by a metal part. There are two lids on top and a connection for air at the bottom.
Pneumatic cutting beading machine TP / TS 1
(Product No.: 415.927.G)
The image shows a mechanical device that has two transparent chambers, connected by a metal part. There are two lids on top and a connection for air at the bottom.
Notice / Inquire

Pneumatic cutting beading machine TP / TS 1

dpvlink:
5418
Further product information
 
4,193.30 CHF

excl. 8.1% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

Pneumatic cutting beading machine TP / TS 1

The pneumatic cutting and crimping machine TP / TS 1 from Olamef is specifically designed for processing loose radial components. This base unit allows manual feeding of connection wires by vertically inserting them into the permanently mounted die. The cutting and bending process is activated by a foot pedal, enabling quick and precise cutting and deformation of the wires.
The machine offers a variety of processing options through the use of different tools that can be easily exchanged. This ensures flexible adaptation to specific component processing requirements and optimizes the production process in terms of efficiency and accuracy.
Height
Height
140 mm
Length
Length
390 mm
Width
Width
230 mm
Show accessories
Accessories

Accessories

The image displays a technical diagram with a sketch of an element and a table with dimensions. The table includes minimum and maximum measurements in millimeters for various parameters.
Tool stand-off / snap-in
Tool kit + stand-off/snap-in + + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 180 600 TS 1)
dpvlink
6157

1,193.55 CHF
Show product
The image displays a technical drawing of a component, likely an LED, and a table with measurements for the dimensions a, b, c, and D. The table includes minimum and maximum values in millimeters.
LED tool stand-off / snap-in
Tool kit + stand-off/snap-in + LED
+ standard +, P = 2.54 mm
(tool code 180 700 TS 1)
dpvlink
6158

822.30 CHF
Show product
The image displays a technical drawing and a table. On the left is a view of a component with various dimensions, while on the right, the table contains minimum and maximum values for certain dimensions.
Tool stand-off
Tool kit + stand - off + + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 180 800 TS1)
dpvlink
6159

1,193.55 CHF
Show product
The image shows a technical drawing of a component with dimensions in a table. On the left is a schematic representation, on the right are dimensions listed in millimeters.
Tool snap-in
Tool kit + snap-in + component lying on PCB
+ standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 180 900 TS 1)
dpvlink
6160

1,193.55 CHF
Show product
The image shows a technical drawing with a schematic component and a table. The table lists dimensions (Min./Max.) for various diameters and heights.
Cutting tool
Tool kit + just cut + + standard
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 181 000 TS 1)
dpvlink
6161

971.65 CHF
Show product
The image displays a technical drawing and a table. The drawing illustrates two cylindrical components with dimensions. The table includes minimum and maximum measurements in millimeters for various parameters.
Tool diode with 4 leads stand-off
Tool kit + stand-off + diode with 4 leads
+ standard +, P = 5.08 mm
(tool code 181 100 TS 1)
dpvlink
6162

822.30 CHF
Show product
The image shows a technical drawing of an LED with dimensions and a table that contains minimum and maximum values for various measurements.
LED tool polarity stand-off /snap-in
Tool kit + stand-off / snap-in + LED polarity
+ standard +, P = 2.54 mm
(tool code 181 200 TS 1)
dpvlink
6163

891.95 CHF
Show product
The image displays a technical drawing of a component with dimensions. On the left is a schematic representation, on the right a table with minimum and maximum size specifications for various measurements.
Tool 90° bend and cut
Tool set 90 ° bend and cut
+ standard +, b = 6 mm fix
(tool code 181 300 TS 1)
dpvlink
6164

1,337.25 CHF
Show product
The image displays a technical drawing with a cross-section and a table. The table lists dimensions (a, b, c, d, D) with minimum and maximum values in millimeters, as well as fixing points.
Tool SMD mounting, bend and cut
Tool kit SMD mounting bend and cut
+ standard +, b = 2 mm fix, c = 2.5 mm fix
(tool code 181 400 TS 1)
dpvlink
6165

1,337.25 CHF
Show product
The image displays a technical drawing of a component with dimensions in millimeters. Next to the drawing is a table with minimum and maximum values for various measurements.
Tool stand-off
Tool kit + stand-off + bead inside + standard +
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 181 500 TS 1)
dpvlink
6166

1,193.55 CHF
Show product
The image shows a technical drawing of a component with dimensions for various distances and diameters in a table format. On the left is a schematic representation of the component, on the right is the corresponding dimension table.
Tool increasing pitch
Tool kit increase/cut grid dimension
+ standard + from 2.54 to 5.08 mm
(tool code 181 700 TS 1)
dpvlink
6167

870.60 CHF
Show product
The image shows a technical drawing of a component with a rectangular head and two usable connectors. Next to it is a table with dimensions in millimeters.
Tool reducing pitch
Tool kit reduce/cut grid dimension
+ standard + from 5.08 to 2.54 mm
(tool code 181 800 TS 1)
dpvlink
6168

870.60 CHF
Show product
The image shows a technical drawing with the dimensions of a part, schematically represented on the left, and on the right a table with minimum and maximum values for various dimensions (a, b, c).
Preview: Tool TO-220
Preview: The image shows a technical drawing with dimensions and a table. The table contains minimum and maximum values for the dimensions a, b, and c in millimeters.
Tool TO-220
Tool kit TO 220 center lead spread/
cut + standard +, p = 2.54 mm fix
(tool code 182 100 TS 1)
dpvlink
6169

1,193.55 CHF
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch with lines and labels for dimensions. On the right, there is a table with minimum and maximum values in millimeters.
Tool TO-220, center lead
Tool kit TO 220 center lead bead / spread /
cut + standard +, p = 2.54 mm fix
(tool code 182 200 TS 1)
dpvlink
6171

1,389.85 CHF
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch of a component, on the right a table with min. and max. values for a, b, c, and p.
Tool TO-220
Tool kitTO 220 center lead spread /
bead / cut + standard +, p = 2.54 mm fix
(tool code 182 300 TS 1)
dpvlink
6172

1,522.15 CHF
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch of a component, on the right a table with values for a, b, and c, including minimum and maximum values.
Tool TO-220, in-line stand-off / snap-in
Tool kit TO-220 in-line stand off/snap-in
+ standard +, p = 2.54 mm fix
(tool code 182 400 TS 1)
dpvlink
6173

1,476.65 CHF
Show product
The image displays a technical drawing of a component with dimensions and a table. The table lists the minimum and maximum dimensions for the parameters a, b, c, and p.
Tool TO-92, center lead
Tool kit TO 92 center lead spread /
cut + standard +, p = 2.54 mm fix
(tool code 182 500 TS 1)
dpvlink
6174

1,193.55 CHF
Show product
The image shows a technical drawing with dimensions. On the left is a schematic representation of a component, on the right a table with minimum and maximum dimensions for various parameters.
Tool TO-92, center lead
Tool kit TO 92 center lead bead /
spread / cut + standard +, p = 2.54 mm fix
(tool code 182 600 TS 1)
dpvlink
6175

1,389.85 CHF
Show product
The image displays a technical drawing of a fastening element with dimensions and a table. On the left is a schematic representation, while the right shows minimum and maximum dimensions for various measurements.
Tool TO-92, center lead
Tool kit TO 92 center lead spread /
bead / cut + standard +, p = 1.27 mm fix
(tool code 182 700 TS 1)
dpvlink
6176

1,522.15 CHF
Show product
On the left is a technical drawing of an element with dimensions, on the right a table with two rows. The table lists minimum and maximum dimensions for the columns a, b, and c, as well as the word "fixed".
Tool TO-92, in-line stand-off / snap-in
Tool kit TO-92 in-line stand off/snap - in
+ standard +
(tool code 182 800 TS 1)
dpvlink
6177

1,476.65 CHF
Show product
The image displays technical drawings of a component with various dimensions. On the left, a side and top view are shown, while on the right, there is a table with minimum and maximum dimensions.
Preview: Tool TO-220 90° bending
Preview: The image displays a technical drawing of a component with the dimensions a, b, f, and p. Adjacent to it is a table with minimum and maximum dimensions in millimeters.
Tool TO-220 90° bending
Tool kit TO 220 90 ° bend, center
lead spread + standard +
(tool code 183100 TS 1)
dpvlink
6170

1,698.55 CHF
Show product
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 520
Complete Catalog 2023 - 2024

Product Family

TP / TS 1

Pneumatic cutting and crimping machine for loose radial components

The pneumatic cutting and crimping machine TP/TS1 can be used for the cutting and bending of loose radial components.

The feeding of the components takes place manually by vertical insertion of leads into the firmly mounted matrix. The cutting process is started by pressing the foot switch. The cutting and the forming of the leads is made quickly and precisely.

The machine can be equipped with tools for various processing possibilites. The individual tools can be easily exchanged.

Technical data
Performance:approx. 2,000 components per hour
Dimensions:390 x 230 x 140 mm
Weight:13 kg
Air connection:6 bar

Article image
Article description
Height
Length
Width
Price
Compare
415.927.G - Pneumatic cutting beading machine TP / TS 1
415.927.G
Pneumatic cutting beading machine TP / TS 1
140 mm
390 mm
230 mm
4,193.30 CHF
Show Compare List (0)

This product is similar to:

The image displays technical drawings of a component with various dimensions. On the left, a side and top view are shown, while on the right, there is a table with minimum and maximum dimensions.
Preview: Tool TO-220 90° bending
Preview: The image displays a technical drawing of a component with the dimensions a, b, f, and p. Adjacent to it is a table with minimum and maximum dimensions in millimeters.
Tool TO-220 90° bending
Tool kit TO 220 90 ° bend, center
lead spread + standard +
(tool code 183100 TS 1)
dpvlink
6170

1,698.55 CHF
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch of a component, on the right a table with values for a, b, and c, including minimum and maximum values.
Tool TO-220, in-line stand-off / snap-in
Tool kit TO-220 in-line stand off/snap-in
+ standard +, p = 2.54 mm fix
(tool code 182 400 TS 1)
dpvlink
6173

1,476.65 CHF
Show product
The image shows a technical drawing with a schematic component and a table. The table lists dimensions (Min./Max.) for various diameters and heights.
Cutting tool
Tool kit + just cut + + standard
P = 2.54 / 5.08 / 7.62 / 10.16 mm
(tool code 181 000 TS 1)
dpvlink
6161

971.65 CHF
Show product
The image displays a technical drawing with dimensions and a table. On the left is a sketch with lines and labels for dimensions. On the right, there is a table with minimum and maximum values in millimeters.
Tool TO-220, center lead
Tool kit TO 220 center lead bead / spread /
cut + standard +, p = 2.54 mm fix
(tool code 182 200 TS 1)
dpvlink
6171

1,389.85 CHF
Show product