The image shows a long, rectangular, black container. The surface is ribbed and has red reflectors at the ends. The container is sturdy and has an industrial aesthetic.
Partition 100, reinforced
(Product No.: 8910102)
The image shows a long, rectangular, black container. The surface is ribbed and has red reflectors at the ends. The container is sturdy and has an industrial aesthetic.
Notice / Inquire

Partition 100, reinforced

Partition 100, reinforced

dpvlink:
4285
Version:
strengthened
Length :
359 mm
Height :
100 mm
Width :
20 mm
Properties:
Further product information
 
chevron-down
39.05 CHF

excl. 8.1% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

Partition 100, reinforced

The Stegwand 100, reinforced by CAB, is designed for use in technically demanding environments. This wall is characterized by its simple and quick assembly, as it is adjusted on profile rails and fixed with screws. The double-walled construction provides exceptional stability and torsional rigidity, which can be further increased by a metal tube if necessary.
The Stegwand allows for secure insertion of circuit boards through funnel-shaped guide grooves, while glued positioning strips with yellow markings ensure precise assembly. Additionally, groove locks prevent damage to components. The Stegwand is stackable, supported by fixing holes and pegs at the outer corners, and the retractable handles facilitate transportation.
For storage and transport of equipped circuit boards, the magazines can be set upright and fit into standard containers. The Stegwand 100 is made of polypropylene, has a width of 100 mm, a height of 20 mm, and a length of 359 mm. It features 32 grooves with a width of 2.8 mm and a depth of 2.0 mm. Its surface resistance is 10^9 Ω and it is volume conductive. The color of the Stegwand is black.
Version
Version
strengthened
Length
Length
359 mm
Height
Height
100 mm
Width
Width
20 mm
Color
Color
black
Spacing
Spacing
10 mm
Conductivity
Conductivity
volume conductive
Surface resistance Rs
Surface resistance Rs
109 Ω
Material
Material
polypropylene
Groove depth
Groove depth
2.0 mm
Groove width
Groove width
2.8 mm
Groove number
Groove number
32
Pictograms
ESD protective
Electrostatic Discharge - marking for materials intended to protect other components from ESD by avoiding potential differences.

Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 350
Complete Catalog 2023 - 2024

Product Family

Partition 100

Quick and easy installation - The partition walls can be adjusted on the profile rails. Two PCBs are inserted into the outer adjustment grooves. The upper partition wall is pressed against the PCBs and fixed in place with screws.

Stable and torsion-resistant - The partition walls are extremely stable thanks to their double-walled construction. In addition, the partition wall can be reinforced with a metal tube to withstand high mechanical and thermal loads.

Slot lock - Unused guides can be covered by slot locks to prevent damage to components when the PCBs are inserted into the magazine.

Stackable - The magazines can be stacked thanks to fixing holes and pins on the outer corners. Recessed grips on the underside of the partition walls make lifting easier.

Upright storage - Assembled PCBs must be stored horizontally before soldering. The magazines are set upright for this purpose.

Transport container - The magazines can be placed in standardized containers (600 x 400 mm or 400 x 300 mm) for transport. The retractable carrying handles facilitate insertion and removal.

Safe guide
The guide grooves are funnel-shaped at the beginning to ensure safe insertion of the PCBs. Glued-on positioning strips with yellow markings indicate the exact placement position and prevent PCBs from being inserted at an angle by hand.

The partition is available in three versions: with or without reinforcement or with holes for groove lock.

1. Carrying handles
They facilitate transportation and, above all, allow the PCB holders to be easily removed from transport boxes. They are retractable to save space in height.  

2. Clamp
It can be screwed onto the side of each PCB holder. This is used to clamp accompanying documents such as parts lists and order forms.  

3. Support rail
It is used to support heavy and large PCBs and secures them so that they cannot slip out during transportation. 

4. Profile rail
It is made from an extruded aluminum profile and is supplied in any desired length.  

5. Partition walls
The double-walled partition walls are extremely stable and torsion-resistant thanks to the sandwich structure. 

6. Free space
To ensure that protruding components are not damaged, the support edge is 17 mm above the table surface.

Technical data:

Numbers of guiding grooves:

32

Distance of guiding grooves:

10 mm

Material:

polypropylene

Color:

black

Continuous use temperatur:

70°C

Groove width:

2.8 mm

Groove depth:

2.0 mm

PCB spacing:

10 mm

max. placement:

32 PCBs

No drop in conductivity after ageing, very good chemical and UV resistance.

Conductive version = electrostatically volume conductive

In compliance with the DIN EN 61340-5-1


Article image
Article description
Version
Length
Height
Width
Price
Compare
8910050 - Partition 100
8910050
Partition 100
unstrengthened
359 mm
100 mm
20 mm
25.05 CHF
8910102 - Partition 100, reinforced
8910102
Partition 100, reinforced
strengthened
359 mm
100 mm
20 mm
39.05 CHF
8913913 - Partition 100, with holes for groove lock
8913913
Partition 100, with holes for groove lock
 
359 mm
100 mm
20 mm
35.30 CHF
Show Compare List (0)