Technical data:
| CE mark | EN 14014 | compliant |
| Surface | smooth | |
| Total thickness | EN ISO 24346 | 2,0 mm |
| Tile size | EN ISO 24342 | 615 x 615 mm |
| Basis weight | EN ISO 23997 | 3.2 kg/m² |
| Tile weight | 3.2 kg | |
| Fire behavior | EN 13501-1 | Bfl -s1 |
| Thermal conductivity | EN 12524 | 0.25 W/(m-K) |
| Slip resistance | ||
| EN 51130 | R9, µ ≥ 0.3 | |
| Chair castor load | ISO 4918 | suitable (type W) |
| Electric resistance | IEC 61340-4-1 | < 1 x 106 Ohm - < 1 x 108 Ohm |
| ESD STM7.1 | ||
| Walk charging | IEC 61340-4-5 | < 100 V |
| ESD STM 97.2 | ||
| EN 1815 | ||
| Impact sound reduction | EN ISO 140-8 | 2 dB |
| Trafficability with hard tires (Variations possible depending on local conditions) | Lift truck and forklifts: up to a total weight from 2.5 t to 5 t with pneumatic tires. Static: 50 kg/cm³ - dynamic 90 kg/cm³ | |
| Chemical resistance | EN ISO 26987 | very good |
| Recyclable | yes | |
Forbo color selection ColoRex SD tilesSignal
Structure of ColoRex
ColoRex contains dimensionally stable chips with a conductive coating instead of "liquid" chemical additives (antistatic agents).
Thus, the electrical properties of the surface are permanently constant. Furthermore, the conductivity is not affected by air humidity and aging.
ColoRex is turned into a highly durable covering because of the homogeneity achieved by the extremely high-pressure production. So, it is not only resistant to a high point load, but, due to its best wear-resistance, also to any damages caused by static and dynamic loads.
Possibilities of use
Due to its highly compacted material the surface of ColoRex is completely smooth and nonporous. Therefore, it is also suitable for the use in cleanrooms. In addition, it has extremely low emission, which is getting more and more important for the use in cleanrooms.
Repair
Even damages on ColoRex, such as long and deep scratches, holes, burns and other more or less serious surface damages, can be repaired effectively and easily without a trace and without affecting the original properties of the flooring. This 100% repairability is a unique characteristic of ColoRex.
Care and maintenance
Loosely floating dust can be removed by vacuuming or damp mopping with impregnated disposable wipes. Alternatively, the floor can be cleaned by spray with a single-disk machine with red pad and spray device with a neutral and wax free cleaning solvent. Large areas must be cleansed with a suitable scrubbing machine. Borders have to be cleaned manually.
Details
ColoRex SD - ESD flooringcolors: according to color card - signal colors
Tiles 610 x 610 mm = 0.3721 m², thickness: 2 mm
(DIN EN 61340-5-1)
- Color
- see selection of signal colors
- Width [mm]
- 615
- Length [mm]
- 615
- Thickness [mm]
- 2
- Fire class
- Bfl – s1
- Bleeder resistance
- 106 - 108 Ω
- Weight
- 3.2 kg
Accessories
Downloads
- Please log in to download datasheets! :
- There are several datasheets for this product. Please log in!
Catalogues
Product Family
| Color | Width [mm] | Length [mm] | Thickness [mm] | Price | Compare | ||
|---|---|---|---|---|---|---|---|
|
1261.SD ColoRex SD ESD flooring |
| see color selection | 615 | 615 | 2 | 53.90 CHF | |
|
1261.SD-Signal ColoRex SD-Signal - ESD-flooring |
| see selection of signal colors | 615 | 615 | 2 | 73.05 CHF | |
| Show Compare List (0) | |||||||
