The image shows a cylindrical, black screwdriver with a silver head. The handle is non-slip and has a clip mechanism. At the tip, there is a long, thin tool.
ESD EC Electric screwdriver CS303
(Product No.: SGT-CS303-ESD)
The image shows a cylindrical, black screwdriver with a silver head. The handle is non-slip and has a clip mechanism. At the tip, there is a long, thin tool.
Notice

ESD EC Electric screwdriver CS303

ESD EC Electric screwdriver CS303

dpvlink:
28207
Start type:
lever start/ push start
Torque range:
0.4 - 3.0 Nm
Idle speed High:
980
Idle speed Low:
60
Properties:
KILEWS brushless electric screw technology
Further product information
 
2,852.35 CHF

excl. 8.1% tax

1 PCE
Compare Compare
Notice
Product Info

ESD EC Electric screwdriver CS303

The Kilews CS303 ESD-EC electric screwdriver represents a cutting-edge solution for precise screwdriving tasks. This device is distinguished by its ability to directly measure torque and rotation angle measurements, rather than indirectly through motor current, ensuring increased safety and accuracy. With a torque range from 0.4 to 3.0 Nm and a continuously adjustable torque setting, the screwdriver flexibly adapts to various requirements.
The no-load speeds vary between 60 and 980 RPM, which, along with the start modes of lever start and push start, as well as a combination of both, allows for optimal adaptation to different screwdriving cases. The screwdriver is ESD-safe and features a grounded bit, making it particularly suitable for sensitive electronic components.
Additional features include an integrated white LED light for illuminating the work area effectively, as well as process monitoring and screw counting, which contribute to quality assurance. The device weighs 718 g and has a length of 291 mm, making it handy and easy to handle. The output voltage is 40 V/DC with a power of 90 W.
Please note that the appropriate control unit must be ordered separately.
Start type
Start type
lever start/ push start
Torque range
Torque range
0.4 - 3.0 Nm
Idle speed High
Idle speed High
980
Idle speed Low
Idle speed Low
60
Output voltage DC
Output voltage DC
40 V/DC
Power
Power
90 W
Length
Length
291 mm
ESD
ESD
yes
suitable bit type
suitable bit type
Typ B
Accuracy
Accuracy
7.5 %
Series
Series
CS
Socket
Socket
1/4" 6.35 mm
Torque setting
Torque setting
stepless
Weight
Weight
718 g
KILEWS brushless electric screw technology
Show accessories
Pictograms
ESD protective
Electrostatic Discharge - marking for materials intended to protect other components from ESD by avoiding potential differences.

Accessories

Accessories

The image shows a digital display in a square casing. It displays various values, including "Target Torque" and "Degree", as well as the status "READY". There are buttons for functions.
Controller for CS series
KL-GTCS Controller KILEVS
suitable for torques from 0.1 - 7 Nm
Inputs: Sensor/Release/Start/Reset/Reverse
Outputs: OK/NG/OK ALL/Start/Reverse
Interfaces: RS-232X2, Micro SD, LAN
120-240V, output DC 24V,
Dimensions: 266 x 180 x 145 mm , weight 4.08 kg
( suitable for SKT-CS )

Serial No. ………………….
dpvlink
28216

6,512.35 CHF
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Product Family

Article image
Article description
Start type
Torque range
Idle speed High
Idle speed Low
Price
Compare
SGT-CS301-ESD - ESD EC Electric screwdriver CS301
SGT-CS301-ESD
ESD EC Electric screwdriver CS301
lever start/ push start
0.1 - 1.0 Nm
980
60
2,852.35 CHF
SGT-CS302F-ESD - ESD EC Electric screwdriver CS302F
SGT-CS302F-ESD
ESD EC Electric screwdriver CS302F
lever start/ push start
0.3 - 2,4 Nm
2000
60
3,018.30 CHF
SGT-CS303-ESD - ESD EC Electric screwdriver CS303
SGT-CS303-ESD
ESD EC Electric screwdriver CS303
lever start/ push start
0.4 - 3.0 Nm
980
60
2,852.35 CHF
SGT-CS503-ESD - ESD EC Electric screwdriver CS503
SGT-CS503-ESD
ESD EC Electric screwdriver CS503
lever start/ push start
0.4 - 3.0 Nm
1600
60
2,852.35 CHF
SGT-CS505-ESD - ESD EC Electric screwdriver CS505
SGT-CS505-ESD
ESD EC Electric screwdriver CS505
lever start/ push start
0.7 - 5.0 Nm
1600
60
2,852.35 CHF
SGT-CS507-ESD - ESD EC Electric screwdriver CS507
SGT-CS507-ESD
ESD EC Electric screwdriver CS507
lever start/ push start
0.9 - 7.0 Nm
650
30
2,852.35 CHF
Show Compare List (0)

This product is compatible with (for example):

The image shows a silver screwdriver bit with a smooth, straight end. It has a distinctive constriction in the middle and is marked with the inscription "wiha".
Slotted bit 7040Z 5.5 x 0.8
Slotted bit 5.5 x 0.8 mm
Length 50 mm / E 6.3
dpvlink
6460

5.25 CHF
The image shows a mechanical device with a long vertical stand and a rope dispenser attached at the top. A horizontal carriage can be moved along the stand.
Linear support arm LTA 5-400, max. 5 Nm
Articulated support arm LTA 5-400 with
spring balancer
Finish: aluminum, steel, high quality
linear bearings
- Column height: 700 mm
- Torque/reaction torque: up to 5 Nm
- Working range: 517 - 519 mm
- Cable pull: up to 2 kg
- Load capacity: max. 2 kg
- Swivel range: 360°
- Stand: 80 x 135 mm
- Tool holder: 23 - 40 mm
dpvlink
28232

967.45 CHF
The image shows a mechanical lifting device with a vertical stand, a redirection pulley at the top, and a swivel arm. The base is square and stable.
Support arm
Articulated arm GTA 15/400, max. 15 Nm;
Version: aluminium/steel/high-quality linear
bearings

- column height 700 mm
- tool clamping range 23-40 mm,
- working range 0-420 mm
- working height adjustable
- stand 80 x 135 mm
dpvlink
28225

1,012.60 CHF
The image shows a black plastic cup holder. It features a funnel-shaped opening and is attached to a surface with three screws.
Tool holder for series BN 800 / PTA-BS
Tool holder KH-2 for electric screwdrivers type
"Kilews"
Intermal diameter above approx. 58 mm,.
Intermal diameter bottom 30 mm,.
suitable for screwdriver type SKD-BE/BN 500/700/800 series
dpvlink
20616

13.20 CHF
The image shows a rectangular black container with a surface made of green, perforated material. The holes are evenly spaced and small. It appears solid and stable.
ESD screw tray M3.0 - 4.0
Vibrating screen KB-3-ESD for screws M1.7 - 2.0
ESD version
dpvlink
20613

66.50 CHF
The image shows a rectangular black container with a surface made of green, perforated material. The holes are evenly spaced and small. It appears solid and stable.
ESD screw tray M2.0 - 2.8
KB-2-ESD Vibrating screen for
screws , ESD version
dpvlink
20613

66.50 CHF
The image shows a rectangular black container with a surface made of green, perforated material. The holes are evenly spaced and small. It appears solid and stable.
ESD screw tray M1.7 - 2.0
Vibrating screen KB-1-ESD for screws M1.7 - 2.0
ESD version
dpvlink
20613

66.50 CHF
The image shows a yellow, rectangular measuring device with a digital display, buttons, and an antenna connection on top. It has two round, black feet on the bottom.
KTM-150 torque tester up to 15 Nm
KTM-150 torque meter 0.15-15.0 nm (+/-1%)
Dimensions: 123 x 230 x 65 mm
>>Kilews<< complete
incl. Case and manufacturer's calibration
certificate
dpvlink
20391

2,620.55 CHF
The image shows a silver screwdriver bit with a square socket. The bit has a slotted end and is engraved with the word "wiha".
Torx Bit 7045 TX 30 x 70
Torx bit TX 30 x 70
Length 70 mm / E 6.3
dpvlink
6519

6.65 CHF
The image shows a silver screwdriver bit with a hexagonal head. The word "wiha" is embossed on the bit. The bit has a smooth surface and a clear, metallic texture.
Torx Bit 7045 TR 25 x 50
Torx-TR bit TR 25 x 50
Length 50 mm / E 6.3
dpvlink
6544

6.35 CHF
The image displays a silver screwdriver bit with a special head. On the side, "wiha" is marked as the trademark. The bit has a straight, smooth shape with a slightly tapered tip.
Pozidriv Bit 7042Z PZ 1 x 150
Pozidriv bit PZ1 x 150
Length 150 mm / E 6.3
dpvlink
6487

9.50 CHF
The image shows a silver screwdriver bit, straight and narrow. At one end, there is a cross-shaped notch. The brand "wiha" is embossed on the surface.
Phillips Bit 7041Z PH 2 x70
Phillips bit PH2 x 70
Length 70 mm / E 6.3
dpvlink
6469

6.25 CHF
The image shows an electric reeling device with a round, black casing and yellow lettering. A cable with a hook hangs down from it to secure objects.
Spring balancer ESD, load capacity 0.4...
ESD Spring balance 9311
- Load capacity 0.4 - 1.0 kg, rope length 1.6m
incl. ESD certificate
dpvlink
28218

60.80 CHF

This product is similar to:

The image shows a mechanical device with a long vertical stand and a rope dispenser attached at the top. A horizontal carriage can be moved along the stand.
Linear support arm LTA 15-200, max. 15 Nm...
Articulated support arm LTA 15-200 with
spring balancer
Finish: aluminum, steel, high quality
linear bearings
- Column height: 700 mm
- Torque/reaction torque: up to 15 Nm
- Working range: 317 - 519 mm
- Cable pull: up to 3 kg
- Load capacity: max. 3 kg
- Swivel range: 360°
- Stand: 80 x 135 mm
- Tool holder: 28 - 44 mm
dpvlink
28232

938.20 CHF
The image shows a mechanical device with a long vertical stand and a rope dispenser attached at the top. A horizontal carriage can be moved along the stand.
Linear support arm LTA 40-200, max. 40 Nm...
Articulated support arm LTA 40-200 with
spring balancer
Finish: aluminum, steel, high quality
linear bearings
- Column height: 700 mm
- Torque/reaction torque: up to 40 Nm
- Working range: 317 - 519 mm
- Cable pull: up to 3 kg
- Load capacity: max. 3 kg
- Swivel range: 360°
- Stand: 80 x 135 mm
- Tool holder: 32 - 47 mm
dpvlink
28232

1,568.90 CHF
The image shows a mechanical device with a long vertical stand and a rope dispenser attached at the top. A horizontal carriage can be moved along the stand.
Linear support arm LTA 5-400, max. 5 Nm
Articulated support arm LTA 5-400 with
spring balancer
Finish: aluminum, steel, high quality
linear bearings
- Column height: 700 mm
- Torque/reaction torque: up to 5 Nm
- Working range: 517 - 519 mm
- Cable pull: up to 2 kg
- Load capacity: max. 2 kg
- Swivel range: 360°
- Stand: 80 x 135 mm
- Tool holder: 23 - 40 mm
dpvlink
28232

967.45 CHF
The image shows a mechanical lifting device with a vertical stand, a redirection pulley at the top, and a swivel arm. The base is square and stable.
Support arm
Articulated arm GTA 15/400, max. 15 Nm;
Version: aluminium/steel/high-quality linear
bearings

- column height 700 mm
- tool clamping range 23-40 mm,
- working range 0-420 mm
- working height adjustable
- stand 80 x 135 mm
dpvlink
28225

1,012.60 CHF