The image shows a round, white mini-monitor with a smooth top. On the top are symbols and the text "DESCO MINI MONITOR" as well as a connection on the side.
The image displays a round device with a black casing and a small monitor in the center. Next to it, there are two metal rings and screws, as well as a black power supply with cable depicted.
Preview: The image shows a round, white mini-monitor with a smooth top. On the top are symbols and the text "DESCO MINI MONITOR" as well as a connection on the side.
Preview: The image displays a round device with a black casing and a small monitor in the center. Next to it, there are two metal rings and screws, as well as a black power supply with cable depicted.

Product Family

Mini moitors

The Desco Mini Monitor is a continuous monitor for a single workstation. It continuously monitors the path-to-ground integrity of an operator and an ESD work surface. The illuminated housing makes the status of the operator and work surface clearly visible to the operator and supervisor.

The mini monitor is designed with Wave Distortion Technology to provide stable, continuous monitoring of the operator's wrist grounding and 1-megohm resistance. Audible and visual alarms are activated (in less than 50 milliseconds) if the operator unintentionally disconnects from the monitor or if the wrist strap connection points are interrupted. The Mini Monitor also monitors that the path between the work surface and ground is less than 10 megohms. All Mini Monitors are calibrated to NIST standards.

  • Continuous single workstation monitor: continuously monitors the path-to-ground integrity of an operator and an ESD work surface
  • Illuminated housing: makes the status of the operator and work surface clearly visible to the operator and supervisor
  • Enhanced continuous visual and audible alarms: illuminates green to indicate proper grounding; illuminates red and emits an audible alarm when disconnected or fails; illuminates blue to indicate standby mode
  • Park Delay Timer and ParkSnap™: indicates the 8-second delay to disconnect the operator's wrist cable and park without triggering a false alarm
  • Mat Monitor Switch: deactivates the work surface monitoring circuit when the device is used in areas where there is no ESD work surface
  • Audible alarm setting: adjusts the volume of the audible alarm from loud to louder
  • Wave Distortion Technology: enables stable, continuous monitoring (as opposed to pulsed or intermittent signals) of the wrist strap ground path and the presence of the 1 megohm safety resistance
  • Threaded grounding and work surface attachment: grounding and monitoring of the work surface without additional cable
  • Single-wire impedance design: meets ANSI/ESD S20. 20 in accordance with ESD TR1.0-01-0
  • 1.2 volt test voltage for the operator: reduces the risk of electrical overstress (EOS) when handling sensitive components
  • Alarm response time <50 milliseconds: identifies failures and interruptions that are overlooked by inferior technologies
  • Available with 4 mm or 10 mm snap

Article image
Article description
Test voltage
Voltage
Height
Ø
Humidity
Operating temperature
Weight
Price
Compare
NEW
7111.19342 - Mini Monitor surveillance monitor with 4mm snap
9 V
100 - 240 V
21 mm
63 mm
80 %
10 - 35 °C
44 g
NEW
7111.19343 - Mini Monitor surveillance monitor with 10mm snap
9 V
100 - 240 V
21 mm
63 mm
80 %
10 - 35 °C
44 g

This product is similar to:

The image shows two flat, round metal discs with a central hole. The surfaces are shiny and reflect light, and the edge is slightly raised.
NEW
NEW
Ring magnets for Mini Monitor 7111.19342/19343

37.80 CHF
The image shows a handy measuring device with a silver casing. It has a round dial in the center and two cables with plugs in different colors sticking out.
Verification unit type 98221 for
surveillance monitor ES-19.652

1,079.80 CHF
The image shows a small black switch with several green LEDs. Labels on the top read "OPR" and "MAT". The switch has a square shape and two mounting holes.
Remote alarm (for single station ES-652)
Set consists of:
-Remote alarm box
-Cable and fixings

64.25 CHF