Solder fume extraction

The image displays a rectangular, perforated metal element in white, supported by two sturdy legs. It features a uniform hole pattern that creates a translucent appearance.
LDA 600 pollutant absorber
LDA 600 - solder fume extractor
Dim.: 445 x 260 x 55 mm, with 6 axial fans
Air flow 650 m³/h, running noise 42dB
220/240V, 110 watts

Product No.: 201.600
351.00 CHF
excl. 8.1% tax
Show product
The image displays a speaker with a square metal grille front. It is mounted on a sturdy black base and features an adjustable holder that allows it to be positioned in various angles.
LDA 4 solder fume extractor
Air flow/hour: 320 m³ / Power: 16 W / Noise level: 36 dB
LDA 4 - solder fume extractor
Dimensions: 260 x 230 x 55 mm, with 4 quiet fans
Air flow 320 m³/h, running noise 36dB
220/240V, 16 watts
Due to the elongated design and the high air flow rate, ideal for manual soldering stations in electronics manufacturing

Product No.: 201.450
229.30 CHF
excl. 8.1% tax
Show product
The image shows a device with a slanted top surface. It has an orange front and a black, textured area underneath. Control knobs are located on the side.
WLA-1 LED solder fume extractor
WLA 1LED - soldering fume absorber
with LED lighting (6.2 W)
2-stage power 30 and 70 m²/h
Table-top unit, H x W x D = 260 x 340 x 170 mm
Front orange, housing light grey, 230V-50 W *
without stand bracket/joint stand *.

Product No.: 200.200
523.60 CHF
excl. 8.1% tax
Show product
The image shows a table lamp with a rectangular metal lampshade. The lampshade stands on a sturdy round base, and the mast is adjustable.
Preview: The image shows a table lamp with a rectangular metal lampshade. The lampshade stands on a sturdy round base, and the mast is adjustable.
Preview: The image shows a table lamp with a rectangular, grid-like lampshade, which is mounted on a sturdy, round base. An adjustable neck connects the base and the shade.
Preview: The image shows a rectangular lamp with a grid top, mounted on an adjustable metal stand. The base is flat and round. The lamp is intended for targeted lighting.
LDA 1 Solder fume extractor
LDA 1 Solder fume extractor
Air flow/hour: 170 m³ / Power: 18 W / Noise level: 40 dB
LDA 1 Solder fume extractor
Air flow/hour: 183 m³ / Power: 8 W / Noise level: 40 dB
LDA 1-R Solder fume extractor
Air flow/hour: 140 m³ / Power: 4 W / Noise level: 38 dB

3 Products
Product No.: 201.250
from 97.35 CHF
excl. 8.1% tax
to the product family
The image shows a silver, rectangular space heater with a grille on the front. It is mounted on a sturdy base and has a cable on the right side.
Preview: The image shows a silver, rectangular space heater with a grille on the front. It is mounted on a sturdy base and has a cable on the right side.
Preview: The image shows a rectangular metallic speaker with a perforated grille on the front. It has a simple gray color and is mounted on a sturdy base.
LDA 2 Solder fume extractor
LDA 2 solder fume extractor
Air flow/hour: 340 m³ / Power: 18 W / Noise level: 44 dB
LDA 2-R Solder fume extractor
Air flow/hour: 220 m³ / Power: 5 W / Noise level: 34 dB

2 Products
Product No.: 201.350
from 219.70 CHF
excl. 8.1% tax
to the product family
The image shows a piece of sandpaper lying on a light surface. The top is rough and dark gray, while the back is smooth and light.
Preview: The image shows a group of six rectangular, black plates. The surface feels rough and textured. They are symmetrically arranged, three on the left and three on the right side.
Preview: The image displays three different square surfaces. At the top is a white one, below that a black granular one, and finally a shiny, light brown surface.
Preview: The image displays a transparent package containing black activated carbon filters. The packaging label reads:
Preview: The image shows two strips of fabric: the upper one is gray with a rough texture, the lower one is light beige and soft. They are stacked on top of each other, their lengths are equal.
Preview: The image shows a piece of sandpaper lying on a light surface. The top is rough and dark gray, while the back is smooth and light.
Preview: The image shows a black, U-shaped bracket with a metal pot on top. The bracket has a flat, stable base and allows for safe parking of the pot.
Preview: The image shows a flexible, gray arm with multiple joints and a mount at the end. It is designed to attach and position devices or cameras.
Preview: The image shows a microphone stand. It has a round, heavy base for stability, a tall, adjustable metal rod with a screw head on top to hold a microphone.
Preview: The image shows a rectangular piece of sandpaper. One side is rough and black, the other side is light and smooth. The texture of the rough side feels gritty.
Preview: The image shows a reading lamp with a large, rectangular shade. The shade is orange and black, attached to a flexible arm that can be mounted on a wall or a table.
Preview: The image shows a device with a slanted top surface. It has an orange front and a black, textured area underneath. Control knobs are located on the side.
Accessories for solder fume extractor
Activated carbon filter for solder fume extractor LDA 1
Replacement filter LDF 1-R for solder fume extractor LDA 1-R
Activated carbon filter for solder fume extractor LDA 2
Replacement filter LDF 2-R for solder fume extractor LDA 1
Activated carbon filter for solder fume absorber LDA 4
Table tripod LDS 6
Tripod with articulated arm LDS 10
Table tripod LDS 1
Replacement filter LDF 600 for solder fume absorber LDA 600
Replacement activated carbon filter for WLA-1 solder fume extractor
Tripod with articulated arm for WLA-1 solder fume extractor
Support stand for WLA- 1 solder fume extractor

12 Products
Product No.: 201.455
from 7.30 CHF
excl. 8.1% tax
to the product family
1 to 6 (from a total of 6)