The image shows a black plug with a silver end. It has round, smooth shapes and a non-slip surface. A turquoise stripe runs around the plug.
WP 120 soldering iron 120 W
(Product No.: 529.193.99)
The image shows a black plug with a silver end. It has round, smooth shapes and a non-slip surface. A turquoise stripe runs around the plug.
Notice / Inquire

WP 120 soldering iron 120 W

WP 120 soldering iron 120 W

dpvlink:
8307
Properties:
Further product information
 
234.80 CHF

excl. 8.1% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

WP 120 soldering iron 120 W

The WP 120 soldering iron from Weller is a high-quality, ESD-safe tool specifically designed for precise and efficient soldering tasks. With a power of 120 W and a compatible soldering tip from the XT series, this model ensures rapid heating times between 10 and 30 seconds and allows for precise temperature control ranging from 50 to 450°C. The Power Response and Silver-Line heating technologies ensure optimal heat transfer.
The soldering iron is suitable for both small and very large components with high energy requirements and can be easily used with Weller WT soldering stations and WR rework stations. The device is available both as a single item with a suitable soldering tip and as a set that includes a safety holder. This makes the WP 120 a versatile tool for various soldering tasks.
Power
Power
120 W
ESD
ESD
yes
suitable soldering tip series
suitable soldering tip series
XT
Heating-up time
Heating-up time
14 s
Show accessories
Pictograms
ESD protective
Electrostatic Discharge - marking for materials intended to protect other components from ESD by avoiding potential differences.

Accessories

Accessories

The image shows a silver metal capsule in the shape of an elongated cylinder that tapers to a point at one end. The other end is flat and round. The surface is smooth.
Soldering tip chisel-shaped XT AL
XT AL chisel tip 1.6 x 1 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image shows a silver screwdriver with a flat, wide end. The handle is cylindrical and fits well in the hand. The edge is slightly rounded.
  End of Life
  End of Life
Soldering tip chisel-shaped XT M
XT M chisel tip 3.2 x 1.2 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image shows a silver, pointed object that looks like a pencil without wood. It has a round base and a conical tip. It might represent a special writing or drawing tool.
Soldering tip chisel-shaped XT A
XT A chisel tip 1.6 x 0.7 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image shows a metallic capsule with a pointed, gray tip. It has a cylindrical shape and is tilted on a white background. The surface is shiny.
Soldering tip chisel-shaped XT B
XT B chisel tip 2.4 mm x 0.8 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image shows a slim, silver metal object with a pointed tip and a cylindrical body. The lower part has a flat edge.
Soldering tip chisel-shaped XT C
XT C chisel tip 3.2 mm x 0.8 mm
for WP 120 and WXP
dpvlink
11340

10.25 CHF
Show product
The image shows a silver metal cylinder with a flat, broadly shaped tip and a slightly rounded end. The cylinder is lying at an angle on a white surface.
Soldering tip chisel-shaped XT D
XT D chisel tip 4.6 mm x 0.8 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image shows an elongated, silver metal cylinder with a flattened, hexagonal tip. The body is smooth, without visible patterns or handles.
Soldering tip chisel-shaped XT E
XT E chisel tip 5.9 x 1.2 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image shows a silver, pointed pen or marker. It has a cylindrical shape and a smooth surface that is thicker in the middle and narrower at the tip.
Soldering tip 60° XT AA
XT AA 60° soldering tip 1.6 mm
for WP 120 and WXP 120
dpvlink
14753

12.75 CHF
Show product
The image shows a cylindrical, silver-colored object with a pointed, round front and a flat, rounded end. It has a smooth surface and is metallic.
Soldering tip 45° XT BB
XT BB 45° soldering tip 2.4 mm
for WP 120 and WXP 120
dpvlink
14755

12.75 CHF
Show product
It is a silver, cylindrical object with a rounded tip and a flat end. It has a smooth surface and appears to be made of metal.
Soldering tip 45° XT CC
XT CC 45° soldering tip 3.2 mm
for WP 120 and WXP 120
dpvlink
14755

12.75 CHF
Show product
It is a silver, conical object with a sharp tip. It is cylindrical and has a flat base at one end. The surface is smooth and shiny.
Soldering tip chisel-shaped XT H
XT H soldering tip 0.8 mm
for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
The image displays a silver, cylindrical pen with a pointed tip and a flat end. It is lying at an angle on a white surface. Simple, modern design.
Soldering tip round XT O
XT O soldering tip 1.0 mm
for WP 120 and WXP 120
dpvlink
14760

12.75 CHF
Show product
It is a shiny, slender cylinder with a pointed front and a wider, flat end. The surface appears metallic and smooth.
Soldering tip round XT BS
XT BS soldering tip 2.4 mm
for WP 120 and WXP 120
dpvlink
14760

10.25 CHF
Show product
It is a long, slender, metallic object with a pointed tip. The rear part is wider and has a ring-shaped indentation. The surface is smooth and shiny.
Soldering tip round XT CS
XT CS soldering tip 3.2 mm
for WP 120 and WXP 120
dpvlink
14760

10.25 CHF
Show product
The image shows a cylindrical metal cylinder with sharp, rounded ends. The cylinder has a smooth, shiny surface and is wider at the base.
Soldering tip round XT DS
XT DS soldering tip 5.0 mm
for WP 120 and WXP 120
dpvlink
14760

10.25 CHF
Show product
The image shows a silver, pointed pencil. It has a smooth surface and is lying diagonally on a white surface. The lead is gray.
Soldering tip 30° XT F
XT F 30 ° soldering tip 1.2 mm
for WP 120 and WXP 120
dpvlink
14758

10.25 CHF
Show product
The image shows a silver, cylindrical metal pin with a straight, smooth surface. At one end, there is a threaded section suitable for attachment.
XT Adapter M4
XT adapter M4
for WP 120 and WXP 120
++ individually packaged +++
dpvlink
14765

10.10 CHF
Show product
The image shows a long, slender metal cylinder with a rounded, flat tip. The surface is smooth and shiny, and the end has a wider diameter.
Preview: Soldering tip 45° XT DDH
Preview: The image shows a silver tube that is open at one end and narrower at the other. The surface is shiny and smooth, typically made of metal.
Soldering tip 45° XT DDH
XT DDH 45 ° soldering tip 4.0 mm
+++ individually packaged +++
dpvlink
14755

9.20 CHF
Show product
The image shows a silver metal cylinder with a flat end. The cylinder has a slightly rounded edge and appears sturdy, suitable for technical applications.
Soldering tip chisel-shaped XT B SL
XT B SL chisel tip straight 2.5 x 0.8 mm

for WP 120 and WXP 120
dpvlink
11340

10.25 CHF
Show product
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 606
Complete Catalog 2023 - 2024

Product Family

WP Soldering iron series

 The ESD-safe WP soldering irons from Weller are high-quality tools for precise and efficient soldering work. They offer a fast heat-up time, precise temperature control and are compatible with the Weller WT soldering stations and WR rework stations. Depending on the power, the WP soldering irons are suitable for different soldering jobs or component sizes. The soldering irons are available as individual items with a matching soldering tip and/or as a set with a safety rest.

  • Soldering irons with different power levels (80-200 W)
  • Fast heating times (10-30 sec.)
  • Heating element technology: Power Response or Silver-Line
  • For different component sizes (small to very large) with high energy requirements
  • Temperature range 50 - 450 or 550°C


Article image
Article description
Power
ESD
included soldering iron
suitable soldering tip series
Heating-up time
Temperature range
Safety rest
Voltage
Price
Compare
529.180.99 - WP 80 soldering iron with soldering tip LT-B
529.180.99
WP 80 soldering iron with soldering tip LT-B
80 W
yes
WP 80
LT
10 s
50 - 450 °C
 
 
203.25 CHF
529.181.99 - WP 80 soldering iron set
529.181.99
WP 80 soldering iron set
80 W
 
WP 80
LT
10 s
50 - 450 °C
WSR 201
 
226.40 CHF
529.193.99 - WP 120 soldering iron 120 W
529.193.99
WP 120 soldering iron 120 W
120 W
yes
 
XT
14 s
 
 
 
234.80 CHF
529.194.99 - WP 120 Soldering iron set
529.194.99
WP 120 Soldering iron set
120 W
yes
WP 120
XT
14 s
 
WDH 10T
 
283.20 CHF
529.199.99 - WP 200 soldering iron 200 W
529.199.99
WP 200 soldering iron 200 W
200 W
yes
 
XHT
30 s
50 - 550 °C
 
24 V
306.40 CHF
Show Compare List (0)

This product is compatible with (for example):

The image shows a sturdy, black holder with an adjustable metal clamp mounted on a base. It bears the brand "Weller" and is intended for precision work.
Preview: SD 1000 solder dispenser
Preview: The image shows a spool holder for solder wire. The spool is made of metal, mounted on a stable black base. A thin wire exits the spool at the top.
SD 1000 solder dispenser
Solder dispenser SD-1000
dpvlink
7479

67.40 CHF
Show product
The image shows a compact, square device with a white upper part and a black lower part. At the top, there is a round outlet and a lid. On the front, there are buttons and a display.
Zero Smog TL with gas filter
Zero Smog TL solder fume extraction unit
with gas filter art. 587.359.38
power 120 W , 220-240V - 50/60 Hz.
dpvlink
20593

1,146.60 CHF
Show product
The image displays a gray device with a rounded lid and a hose that curves upward in an arch-like shape. The hose features a wide, open nozzle.
Zero Smog TL Kit 1 FN
Zero Smog TL Kit 1 FN solder fume extraction unit
with filter level display
power 120 W , 220-240V - 50/60 Hz.
consisting of:
- FT91013699 solder fume extraction unit Zero-Smog TL
- FT91000033 ZSRS Zero Smog Remote Switch
- 0F10 Flexible extraction arm
- ALFA ALFA funnel nozzle
- shut-off valve with table clamp
- 700-3051-ESD suction hose 3 m
dpvlink
20604

1,286.60 CHF
Show product
The image shows a device with two flexible hose arms extending from a square casing on a table. The hoses are black and round at the ends.
Preview: Zero Smog TL Kit 2 SN
Preview: The image displays a glossy black device with a button on the front and a cable extending to the right. It is a remote control named
Zero Smog TL Kit 2 SN
Zero Smog TL Kit 2 SN solder fume extraction unit
with filter level display
power 120 W , 220-240V - 50/60 Hz.
consisting of:
- 1x FT91013699 solder fume extraction unit Zero-Smog TL
- 1x FT91000033 ZSRS Zero Smog Remote Switch
- 2x 0F15 Flexible extraction arm
- 2x FT-NL metal nozzle sloped diameter 60 mm
- 2 x 587.628.46 mounting clamp diameter 63 mm
dpvlink
20604

1,284.45 CHF
Show product
The image shows a device with two long, flexible hose arms extending from a rectangular casing on a table. The hoses are black and curved.
Preview: Zero Smog TL Kit 2 FN
Preview: The image displays a glossy black device with a button on the front and a cable extending to the right. It is a remote control named
Zero Smog TL Kit 2 FN
Zero Smog TL Kit 2 FN solder fume extraction unit
with filter level display
power 120 W , 220-240V - 50/60 Hz.
consisting of:
- 1x FT91013699 solder fume extraction unit Zero-Smog TL
- 1x FT91000033 ZSRS Zero Smog Remote Switch
- 2x 0F15 Flexible extraction arm
- 2x ALFA ALFA funnel nozzle
- 2 x 587.628.46 mounting clamp diameter 63 mm
dpvlink
20604

1,298.15 CHF
Show product
The image shows a long, narrow wooden stick with a sharp, pointed edge. The surface is smooth and dark brown to black. The stick appears robust and stable.
Preview: Soldering tool type 35622
Preview: The image shows a long, thin, oval object that tapers to a point at the end. It is black and has a flat, straight side with an embossing.
Soldering tool type 35622
Soldering tool 35622 / SP-3010
fiber glass nylon reinforced plastic
dpvlink
20227

4.90 CHF
Show product
The image shows a sturdy holder made of black metal. It has a rectangular base, a vertical stand, and a horizontal arm designed for holding devices.
Solder tin dispenser ESD DS-2500
Solder tin dispenser ESD DS-2500 with tool holder
dimensions.: 190 x 150 x 155 mm, weight 1 kg
dpvlink
17637

40.15 CHF
Show product
The image shows a sturdy, rectangular stand made of black metal. It features two vertical tubes that taper upwards, along with various mounts on the top.
Solder tin dispenser ESD DS-25002B for 2...
Solder tin dispenser ESD DS-2500B for 2 reels
dimensions.: 190 x 150 x 300 mm, weight 1.4 kg
dpvlink
17637

70.35 CHF
Show product
The image shows a black metal bracket. It has a triangular shape with several holes and an adjustable pin to attach various devices.
Solder tin reel holder ESD for second reel...
Solder tin holder ESD DS-2500AB
(Additional holder for second solder wire reel)
dpvlink
17637

32.20 CHF
Show product
The image shows a compact, square device with a white upper part and a black lower part. At the top, there is a round outlet and a lid. On the front, there are buttons and a display.
Zero Smog TL
Zero Smog TL solder fume extraction unit
with filter level display
120 W , 220-240V - 50/60 Hz.
dpvlink
20593

1,059.20 CHF
Show product
The image displays a black soldering iron stand with a digital display. There are buttons for temperature adjustment. The temperature display reads 350 °C. The manufacturer name "Weller" is visible.
Preview: WT 1H - Supply unit
Preview: The image shows a compact device with a blue, rounded side and a black grid-like surface. It has a simple shape and could be some type of kitchen appliance or electronic equipment.
Preview: The image depicts a compact, square device with a smooth, blue top and a ridged back. A socket is visible on the bottom. It appears modern and functional.
Preview: The image shows a compact device in blue and black colors. It has a square, non-slip surface with many small bumps and several buttons and knobs on the front.
Preview: The image shows a soldering station with a soldering tip, two digital control units, and a hot air device. The devices feature large, clear displays for temperature indication.
WT 1H - Supply unit
WT 1H / power supply unit 1-channel, 150 W, 230 V
>>>WT WellerTechnology Line<<<
dpvlink
19980

409.60 CHF
Show product
The image shows a gray wooden block in a rectangular shape. It has a rough surface and is flat with rounded edges. The dimensions are approximately twice as long as they are wide.
Polishing stone
Grinding stone to remove thick
oxide layers from soldering tips
Cleaning possible only in cold condition of the
soldering tip
dpvlink
13825

16.35 CHF
Show product
The image shows a gray, compact structure made up of many thin, spiral-shaped metal threads. It has an irregular, somewhat organized shape and looks like a small, metallic ball.
WDC cleaning wool stainless steel
Spiral wool for WDC replacement (2 pcs)
dpvlink
30244

8.10 CHF
Show product
The image shows a gray, compact structure made up of many thin, spiral-shaped metal threads. It has an irregular, somewhat organized shape and looks like a small, metallic ball.
WDC 2 cleaning wool steel
Spiral wool for WDC 2 replacement (2 pcs)
dpvlink
30244

8.55 CHF
Show product
The image shows a brush with a long wooden handle. The bristles are gray and soft. The handle features the inscription "Weller". The brush appears sturdy and handy.
Stainless steel brush (3 pieces)
Stainless steel wire brush
(3) packed
dpvlink
13823

17.40 CHF
Show product
The image shows a gold-colored, spiral-shaped object made of thin wires. It has an irregular, foamy shape and looks somewhat like a curly ball.
WDC 2 cleaning wool brass
Spiral wool for WDC 2 replacement
brass-plated
PU = 2 pcs
dpvlink
30244

6.65 CHF
Show product
The image shows a small, black pipe cleaner with a golden sponge on top. It has a semi-circular shape and a small shelf. The sponge is soft and textured.
WDC - Dry Cleaner
WDC Weller - Dry cleaner
dpvlink
7481

31.55 CHF
Show product
The image shows a black, slanted block with a round opening. Inside, there is a silver metal grid. It could be a cleaning brush.
Preview: WDC 2 - Dry Cleaner
Preview: The image shows a small, black, wedge-shaped object with a round, golden surface texture. It has a smooth side and a lateral adjustment screw.
WDC 2 - Dry Cleaner
WDC Weller - Dry cleaner
for WDH safety rests
dpvlink
7481

21.40 CHF
Show product
The picture shows a cleaning kit: a black box with golden contents, a green tube, a gray sponge, and a wooden brush with metal bristles. All parts are arranged on a white background.
WDC Cleaning set complete
WDC - cleaning set consisting of:
WCD dry cleaner, WPB1 grindstone, tip activator,
stainless steel brush
dpvlink
7481

62.10 CHF
Show product
The image shows four tools: a black soldering station with a golden spiral, a round can with green contents, a gray grinding stone, and a wooden brush with metal bristles.
WDC 2 Cleaning set complete
WDC 2 - cleaning set consisting of:
WCD dry cleaner, tip activator,
stainless steel brush
dpvlink
7481

53.70 CHF
Show product
The image shows a tool station for winding wires. It consists of a sturdy base, a spool with silver wire, and a stand that holds two markers and a pair of pliers.
Preview: Solder tin dispenser ESD DS-2500-K incl. tool holder
Preview: The image shows a tool holder made of black metal. It features a spool with wire, a holder for pens, and a pair of pliers. An additional inset provides a detailed view.
Solder tin dispenser ESD DS-2500-K incl....
Solder tin dispenser ESD DS-2500-K incl. tools
Diagonal cutting pliers TRE 03 NB
Flat-nosed pliers PN2005
desoldering pump PD03
Tweezers 0SA
Phillips Screwdriver PG2-1
dimensions: 190 x 150 x 255 mm, weight 1.4 kg
dpvlink
17637

81.90 CHF
Show product