Zwischenlage PP Typ A, 553 x 353 x 3 mm Die Zwischenlage PP30-Typ A von EPAstore® ist eine hochwertige Lösung für den sicheren und effizienten Transport von elektronischen Bauteilen. Diese Zwischenlage ist aus extrudiertem Polypropylen gefertigt und besitzt eine Stärke von 3,0 mm sowie ein Gewicht von 600g/m². Die Abmessungen betragen 553 x 353 mm und sie ist speziell für Behälter der Größe 600x400 mm konzipiert.
Die Zwischenlage ist volumenleitfähig und entspricht der ESD-Norm DIN EN 61340-5-1, was sie ideal für Anwendungen macht, bei denen elektrostatische Entladungen vermieden werden müssen. Die Oberfläche weist einen Widerstand von 10^6 Ω auf. Zwei halbrunde Greifaussparungen (34 x 17 mm) erleichtern das Herausnehmen aus Eurobehältern und bieten zusätzlichen Komfort bei der Handhabung.
Das Material zeichnet sich durch hohe Abriebfestigkeit und Robustheit aus, was die Langlebigkeit des Produkts garantiert. Verfügbar in der Farbe Schwarz, vereint diese Zwischenlage Funktionalität mit einer ästhetischen Optik für den technischen Einsatz. Artikelnummer: 050.236.A-30
Zum Einsatz in Transportbehältern, um Elektronikbauteile geordnet und lagenweise zu transportieren bzw. zu lagern
Fixieren Sie Ihre Produkte und schützen Sie sie während dem Transport vor Schäden. Mit den Zwischenlagen aus leichten Polypropylen mit Hohlkammern erreichen Sie zusätzliche Stabilität für Ihre Behälter, die mit Stegwänden ausgestattet sind.
Technische Daten für Standard-Ausführungen
Seitenlänge Behälter:
- 300 / 400 / 600 / 800 mm
Stärken:
- 3,0 mm (Gewicht 600g/m²)
- 3,5 mm extra stabil (Gewicht 800g/m²)
- In verschiedenen Größen mit unterschiedlichen Griffaussparungen verfügbar - elektrostatisch volumenleitfähig - Entspricht der ESD-Norm DIN EN 61340-5-1
Greifaussparungen zur Erleichterung des Herausnehmens aus Eurobehältern in 3 Ausführungen lieferbar:
Standard: 2 Ecken abgeschrägt
Typ A: 2 Greifaussparungen halbrund 34 x 17 mm
Typ C: 2 Greiflöcher rund 30 mm
Typ A
Typ C
In unserem Sortiment finden Sie eine große Auswahl an Zwischenlagen und Trenneinsätze (Gefache) zum Einsatz in Transportbehältern. Die Kombination eignet sich perfekt zum Transport verschiedener ESD-anfälliger Bauteile. Erhältlich in 3 unterschiedliche Materialien für verschiedene Anforderungen:
PP Hohlkammermaterial: - aus extrudiertes Polypropylen (PP) - hohe Abriebfestigkeit - geringes Gewicht
PS Vollmaterial: - aus Polystyrol (PS) - hohe Abriebfestigkeit - hohe Stabilität
PE Schaumstoff: - aus Polyethylenschaumstoff (PE) - Abriebfest und korrosionsfrei - Besonders geringes Gewicht
Unsere Standardgrößen sind auf die meistverwendeten Euro-Transportbehälter ausgelegt.
Sollten Sie bei unseren Standardgrößen nicht fündig werden, fragen Sie uns nach einem kundenspezifischen Format.
Hohe Abriebfestigkeit, geringes Gewicht, Stärke 3,0 mm | 600 g/m²,
Stärke 3,5 mm | 800 g/m², elektrostatisch volumenleitfähig.
Typischer Oberflächenwiderstand: R = 10^4 –10^6 Ohm.
ESD-gerecht
Konfektionierbar
Zwischenlagen und Gefache können individuell an Ihre Wünsche und Bedürfnisse angepasst werden. Hierbei können Größe und Form angepasst werden. Auch Lösungen mit Greifaussparungen sind möglich.